 |
|
|
Return
to Thermogard™ Page
|
XF
570
THERMOGARD™ WHITE POLYIMIDE LABEL STOCK
Technical Data Sheet
POLYONICS, INC.
POLYONICS XF-570 THERMAL TRANSFER PRINTABLE WHITE POLYIMIDE
LABEL STOCK
Description:
Polyonics XF-570 is a polyimide film based label with a permanent
pressure sensitive acrylic adhesive and a high opacity, gloss
white topcoat specifically designed for thermal transfer printing.
Polyonics XF-570 polyimide label material is designed for
barcode or alphanumeric identification of printed circuit
boards, or related electronic components. It is the ideal
label to withstand mixed circuit board processes, on either
the top or bottom side of the board. It has excellent resistance
to harsh fluxes, cleaners, saponifiers, and wave solder environments,
and resists all commonly employed methods of cleaning.
Advantages of 1 mil polyimide labels: |
- Cost
Savings: The thinner construction of our 1-mil polyimide
label material allows you to keep the high performance
properties of Polyonics’ traditional materials,
while reducing your label cost.
-
Greater Operational Ease of Use: The lower profile
of these new polyimide label materials allows for
easier use in processes which demand thin materials,
such as solder paste screen printing. The lower
profile also makes it easier for uniform stacking
and loading of boards.
-
Weight Reduction: Lighter 1 mil labels are ideal
for small electronics applications in which reducing
overall product weight is critical.
|
|
The
printed polyimide label resists smearing, even when the board
and label are directly removed from a reflow or wave solder
environment. Colored versions of XF-570 polyimide label material
are available.
The choice of thermal transfer printer can make a real difference
as well on the overall polyimide label performance. Our materials
can be used with most industrial thermal transfer printers,
such as Zebra, Intermec, Sato, Printronix, NEC, Datamax, and
Brady label printers, for harsh environment bar code label
printing with a wide variety of thermal transfer ribbons.
XF-570 polyimide labels are also suitable for use in ISO clean-room
applications, when used with a film liner instead of a paper
liner. |
|
| Test
data and test results contained in this document are for general
information only and shall not be relied upon by Polyonics customers
for designs and specifications, or be relied on as meeting specified
performance criteria. All values shown are averages and should
not be used for specification Purposes. Customers desiring to
develop specifications or performance criteria for specific
product applications should contact Polyonics for further information. |
|
| Some
useful properties of XF 570 printable white polyimide
label material |
| PROPERTY |
METHOD |
RESULT |
| ADHESIVE
THICKNESS |
ASTM
D 1000 |
0.0008-.0010
in.(0.018-0.025 mm) |
| 180
DEGREE PEEL ADHESION |
ASTM
D 1000 |
24 hour dwell 35 oz/in (39 N/100 mm) |
| 72
hour dwell 50 oz/in (55 N/100 mm) |
| COATED
FILM THICKNESS |
ASTM
D 1000
|
0.0024-.0027
in.(0.061-0.069 mm) |
| FLAMMABILITY |
ASTM
D 1000
|
Average
Burn Time < 2 seconds |
DIELECTRIC
STREGNTH |
ASTM
D 1000 |
>
8 kv |
|
|
| Performance
Properties Typical Results |
| PERFORMANCE
PROPERTIES |
TYPICAL
RESULTS |
| Short
Term High Service Temperature |
5
minutes at 500°F (260°C); No visible effect
to label at 260°C;
Label discolors slightly at 270°C; 300°C label
moderately discolors
Label remains functional. |
Up
to 2 Hours at 338°F (170°C) |
No
visible effect to label at 170°C; label discolors
slightly at 190°C,
moderately at 220°C; severely at 260°C.
Label remains functional. |
Long
Term High Service Temperature |
1000
hours at 212°F (100°C); No visible effect to
label at 100°C;
Label discolors slightly at 120°C; moderately at
145°C.
Label remains functional. |
|
|
| Chemical
Resistance, measured by PCS (Print Contrast Signal) |
| CHEMICAL |
TEST
CONDITION |
RESULT |
| Control |
260°C
heat, 5 minutes |
99% |
| Trichloroethane |
74°C,
10 minutes |
98% |
| Aquanox
SSA® 30% aqueous |
40-50°C,
10 minutes |
98% |
| RE-ENTRY®
KNI 2000 Terpene |
40-50°C,
10 minutes |
98% |
| BIOACT®
EC-7R Terpene |
40-50°C,
10 minutes |
98% |
Alpha
Metals Inc. 2110 Saponifier |
|
|
6%
Aqueous |
65-70°C,
10 minutes |
98% |
Isopropanol
99% |
82°C,
10 minutes |
99% |
Deionized
Water |
100°C,
10 minutes |
99% |
|
| Note.
All values shown are averages and should not be used for specification
purposes. Test data and test results contained in this document
are for general information only and shall not be relied upon
by POLYONICS or American Printing Converters customers for designs
and specifications, or be relied on as meeting specified performance
criteria. Customers desiring to develop spec ifications or performance
criteria for specific product applications should contact POLYONICS
or American Printing Converters for further information. |
Environmental
Tests
|
Customer expectations, supported by our laboratory data clearly
show that XF 570 polyimide label material can be stored for
at least one year in an environment below 80 degrees F and
60% RH . We are confident that our product will perform well
beyond this time frame. However, it remains the responsibility
of the user to assess the risk of using such product. We encourage
customers to
develop functional testing protocols that will qualify a product's
fitness for use, in their actual applications.
**INK
RIBBONS DISCLAIMER NOTE
Polyonics,
Inc. does not endorse ribbons from specific ribbon companies.
Our recommendations are based solely on the manufacturers
testing methods and procedures and are subject to revision
without further notice. |
|
| American
Printing Converters' goal is to achieve total customer satisfaction,
and we offer a 100% guarantee on all our bar code thermal
transfer ribbon products. |
|
|
| TOP OF
PAGE
| Return to Thermogard™ Page |
|
ASTM:
American Society for Testing and Materials (USA)
AQUANOX SSA® is a trademark of Kyzen Corporation.
BIOACT® is a registered trademark of Petroferm, Inc.
RE-ENTRY® is a registered trademark of Environsolv,
Inc. THERMOGARD™, TRIBOGARD®, & POLYONICS
are registered trademarks of Polyonics, Inc. |
|
|
|
|
